Designing your Compressed Air System - Quiz

Quiz Question

1. Kaeser’s air flow measurement system uses liquid flow meters to record the actual amount of compressed air being used at any given time.
True
False
2. The maximum particle size in microns of the quality class number is 5 is more than quality class number 1.
True
False
3. To avoid frost and corrosion from condensate accumulation, the temperature in the room should not fall below________.
40°F
50°F
55°F
48°F
4. Every 2 psi pressure drop costs __________of compressor horsepower in efficiency.
1%
10%
15%
18%
5. Which of the Important installation considerations are :
Adequate ventilation
Foundation
Requirements
Compressor room requirements
All the above
6. Friction loss is higher in longer pipes and in pipes with a smaller diameter.
True
False
7. Which of the following steps can be taken to reduce the pressure drop?
reduce the distance the air must be transported
select smooth bore piping
eliminate leaks
All of the above
None of the above
8. Piping is critical to a compressed air system’s reliability and efficiency.
True
False
9. There are _________ basic methods of ventilation.
Four
Five
Six
Seven
10. Rising pressure, indicating a drop in demand, causes a ___________in compressor output.
Rise
Reduction
Failure
Doesn’t affect