Fire During Hot Work at Evergreen Packaging Paper Mill - Quiz

Quiz Question

1. Derakane 510N resin has a flash point of 79℉ and an auto-ignition temperature of ______________?
450℉
914℉
2. According to Figure 6 (Contractor Daily Briefing Report), the number of attendants mentioned is?
Fire During Hot Work at Evergreen Packaging Paper Mill
4
2
3. The full form of NFPA
National Fire Protection Association
Natural Fire Protection Association
4.

The author outlines a six-step process for analyzing simultaneous operations. Which of the following is/are not mentioned?

  1. Identify potential SIMOPs
  2. Collect information on those activities
  3. Identify interactions
  4. Identify consequences
  5. Identify existing safeguards
  6. Identify location details
Only 6
1 and 2
5.

Evergreen’s hot work policy defines hot work as an "activity that could serve as a source of ignition."

True
False
6. The CSB concludes that temperatures in the 20s (degrees Fahrenheit) might have produced adequate resin gel times for the Blastco workers
True
False
7.

The heat gun should not have been used in the confined space in the presence of the ________ resin?

flammable
nonflammable
8. According Figure 11, if there is no acceptable alternative to hot work and the hot work can be performed in designated area then,
Fire During Hot Work at Evergreen Packaging Paper Mill 1
No hot work permit is needed
Obtain a written hot work permit
9. What does FRP stands for?
Fiber- reinforced plastic
Fiber- reinforced polythene
10.

The resin Blastco used to re-line the upflow tower is classified as a Category 3 flammable liquid and has a flash point below ____________________?

100℉
120℉